Top-rated poly tanks, delivered to you
The top sellers
10,200G / 45,995L Molasses Tank
Request a quote
-
Nu-Tank molasses tanks are a premium tank, manufactured in Rockhampton, Queensland and backed by a 20-year warranty.
They feature:
Specific Gravity of 1.6 (2.0 optional).
Fully self supporting roof with no internal poles or frames.
Manufactured from proven UV stabilised Australian standard materials, tested in the field for over 25 years.
Manufactured in computerised ovens, not open flame.
Ribbed side walls for extra strength.
Thicker walls at base to support pressure.
Poly fused and welded fittings, preventing fitting split.
Australian made materials, not imported.
Product code: PTRNMO10200.
-
Manhole Height – 3200mm
Diameter – 4500mm
This tank holds a double road train load of molasses, with room to spare.
-
Screw Cap Manhole.
Centre Vent.
Stub Flange (See Product Sheet for more info).
Butterfly Valve.
-
Nu-Tank tanks are delivered to most areas of Queensland free of charge, access permitting. The delivery driver will need a clear, flat area to unload your tanks.
Access is required for a 16.5 tonne truck and trailer combination with a maximum length of 19m, width of 3.45m and height of 5m as well as sufficient turning space.
If delivery cannot be made to site for any reason, the product will be unloaded at the closest possible location.
At least one person is required to be present for delivery, although additional people are needed to manoeuvre the tank and place it on your prepared pad.
-
-
6,200G / 28,000L Molasses Tank
Request a quote
-
Nu-Tank molasses tanks are a premium tank, manufactured in Rockhampton, Queensland and backed by a 20-year warranty.
They feature:
Specific Gravity of 1.6 (2.0 optional).
Fully self supporting roof with no internal poles or frames.
Manufactured from proven UV stabilised Australian standard materials, tested in the field for over 25 years.
Manufactured in computerised ovens, not open flame.
Ribbed side walls for extra strength.
Thicker walls at base to support pressure.
Poly fused and welded fittings, preventing fitting split.
Australian made materials, not imported.
Product code: PTRNMO6200.
-
Manhole Height – 2610mm
Diameter – 3700mm
This tank holds a semi trailer load of molasses, with room to spare.
-
Screw Cap Manhole.
Centre Vent.
Stub Flange (See Product Sheet for more info).
Butterfly Valve.
-
Nu-Tank tanks are delivered to most areas of Queensland free of charge, access permitting. The delivery driver will need a clear, flat area to unload your tanks.
Access is required for a 16.5 tonne truck and trailer combination with a maximum length of 19m, width of 3.45m and height of 5m as well as sufficient turning space.
If delivery cannot be made to site for any reason, the product will be unloaded at the closest possible location.
At least one person is required to be present for delivery, although additional people are needed to manoeuvre the tank and place it on your prepared pad.
-
-
5,500 / 25,000L Molasses Tank
Request a quote
-
Nu-Tank molasses tanks are a premium tank, manufactured in Rockhampton, Queensland and backed by a 20-year warranty.
They feature:
Specific Gravity of 1.6 (2.0 optional).
Fully self supporting roof with no internal poles or frames.
Manufactured from proven UV stabilised Australian standard materials, tested in the field for over 25 years.
Manufactured in computerised ovens, not open flame.
Poly banded walls to prevent walls bulging.
Thicker walls at base to support pressure.
Poly fused and welded fittings, preventing fitting split.
Australian made materials, not imported.
Product code: PTRNMO5500.
-
Manhole Height – 2320mm
Diameter – 3700mm
This tank holds a semi trailer load of molasses.
-
Screw Cap Manhole.
Centre Vent.
Stub Flange (See Product Sheet for more info).
Butterfly Valve.
-
Nu-Tank tanks are delivered to most areas of Queensland free of charge, access permitting. The delivery driver will need a clear, flat area to unload your tanks.
Access is required for a 16.5 tonne truck and trailer combination with a maximum length of 19m, width of 3.45m and height of 5m as well as sufficient turning space.
If delivery cannot be made to site for any reason, the product will be unloaded at the closest possible location.
At least one person is required to be present for delivery, although additional people are needed to manoeuvre the tank and place it on your prepared pad.
-
-
Assorted other poly products
Request a quote
-
Other products in the Nu-Tank range include:
Water tanks in more sizes.
Molasses tanks in more sizes.
Slimline tanks.
Dunder tanks.
Diesel round tanks.
Diesel supply tanks.
Industrial tanks.
Septic and greywater tanks.
Water troughs - round and long.
Molasses troughs - round and safety tread.
Cartage tanks - water and molasses.
Feeders.
Spare parts.
-
Dimensions vary per product.
-
Inclusions vary per product.
-
Nu-Tank products are delivered to most areas of Queensland free of charge, access permitting. The delivery driver will need a clear, flat area to unload your tanks.
Access is required for a 16.5 tonne truck and trailer combination with a maximum length of 19m, width of 3.45m and height of 5m as well as sufficient turning space.
If delivery cannot be made to site for any reason, the product will be unloaded at the closest possible location.
At least one person is required to be present for delivery, although additional people are needed to manoeuvre the tank and place it on your prepared pad.
-
-
Contact us for a Product Sheet on a particular product.
10,200G / 45,995L Water Tank
Request a quote
-
Nu-Tank water tanks are a premium tank, manufactured in Rockhampton, Queensland and backed by a 20-year warranty.
They feature:
Fully self supporting roof with no internal poles or frames.
Manufactured from proven UV stabilised Australian standard materials, tested in the field for over 25 years.
Manufactured in computerised ovens, not open flame.
Poly banded walls to prevent walls bulging.
Thicker walls at base to support pressure.
Poly fused and welded fittings, preventing fitting split.
Australian made materials, not imported.
Product code: PTRNWA10200.
-
Inlet Height – 3100mm
Diameter – 4520mm
-
500mm Strainer and Light Guard.
90mm Overflow.
Poly Fused and Welded Fitting: 1”, 1.5” or 2”.
Ball Valve: 1“, 1.5” or 2”.
-
Nu-Tank tanks are delivered to most areas of Queensland free of charge, access permitting. The delivery driver will need a clear, flat area to unload your tanks.
Access is required for a 16.5 tonne truck and trailer combination with a maximum length of 19m, width of 3.45m and height of 5m as well as sufficient turning space.
If delivery cannot be made to site for any reason, the product will be unloaded at the closest possible location.
At least one person is required to be present for delivery, although additional people are needed to manoeuvre the tank and place it on your prepared pad.
-
-
6,200G / 28,000L Water Tank
Request a quote
-
Nu-Tank water tanks are a premium tank, manufactured in Rockhampton, Queensland and backed by a 20-year warranty.
They feature:
Fully self supporting roof with no internal poles or frames.
Manufactured from proven UV stabilised Australian standard materials, tested in the field for over 25 years.
Manufactured in computerised ovens, not open flame.
Poly banded walls to prevent walls bulging.
Thicker walls at base to support pressure.
Poly fused and welded fittings, preventing fitting split.
Australian made materials, not imported.
Product code: PTRNWA6200.
-
Inlet Height – 2610mm
Diameter – 3700mm
-
500mm Strainer and Light Guard.
90mm Overflow.
Poly Fused and Welded Fitting: 1”, 1.5” or 2”.
Ball Valve: 1“, 1.5” or 2”.
-
Nu-Tank tanks are delivered to most areas of Queensland free of charge, access permitting. The delivery driver will need a clear, flat area to unload your tanks.
Access is required for a 16.5 tonne truck and trailer combination with a maximum length of 19m, width of 3.45m and height of 5m as well as sufficient turning space.
If delivery cannot be made to site for any reason, the product will be unloaded at the closest possible location.
At least one person is required to be present for delivery, although additional people are needed to manoeuvre the tank and place it on your prepared pad.
-
-
5,500G / 25,000L Water Tank
Request a quote
-
Nu-Tank water tanks are a premium tank, manufactured in Rockhampton, Queensland and backed by a 20-year warranty.
They feature:
Fully self supporting roof with no internal poles or frames.
Manufactured from proven UV stabilised Australian standard materials, tested in the field for over 25 years.
Manufactured in computerised ovens, not open flame.
Poly banded walls to prevent walls bulging.
Thicker walls at base to support pressure.
Poly fused and welded fittings, preventing fitting split.
Australian made materials, not imported.
Product code: PTRNWA5500.
-
Inlet Height – 2320mm
Diameter – 3700mm
-
500mm Strainer and Light Guard.
90mm Overflow.
Poly Fused and Welded Fitting: 1”, 1.5” or 2”.
Ball Valve: 1“, 1.5” or 2”.
-
Nu-Tank tanks are delivered to most areas of Queensland free of charge, access permitting. The delivery driver will need a clear, flat area to unload your tanks.
Access is required for a 16.5 tonne truck and trailer combination with a maximum length of 19m, width of 3.45m and height of 5m as well as sufficient turning space.
If delivery cannot be made to site for any reason, the product will be unloaded at the closest possible location.
At least one person is required to be present for delivery, although additional people are needed to manoeuvre the tank and place it on your prepared pad.
-
-
5,000G / 22,700L Water Tank
Request a quote
-
Nu-Tank water tanks are a premium tank, manufactured in Rockhampton, Queensland and backed by a 20-year warranty.
They feature:
Fully self supporting roof with no internal poles or frames.
Manufactured from proven UV stabilised Australian standard materials, tested in the field for over 25 years.
Manufactured in computerised ovens, not open flame.
Poly banded walls to prevent walls bulging.
Thicker walls at base to support pressure.
Poly fused and welded fittings, preventing fitting split.
Australian made materials, not imported.
Product code: PTRNWA5000.
-
Inlet Height – 2275mm
Diameter – 3500mm
-
500mm Strainer and Light Guard.
90mm Overflow.
Poly Fused and Welded Fitting: 1”, 1.5” or 2”.
Ball Valve: 1“, 1.5” or 2”.
-
Nu-Tank tanks are delivered to most areas of Queensland free of charge, access permitting. The delivery driver will need a clear, flat area to unload your tanks.
Access is required for a 16.5 tonne truck and trailer combination with a maximum length of 19m, width of 3.45m and height of 5m as well as sufficient turning space.
If delivery cannot be made to site for any reason, the product will be unloaded at the closest possible location.
At least one person is required to be present for delivery, although additional people are needed to manoeuvre the tank and place it on your prepared pad.
-
-
9,200G / 35,000L Liquid Storage Silo / Cone Bottom Tank
Request a quote
-
Enmach poly storage tanks are a high-quality, durable feeding solution suitable for our harsh Australian environment. These Australian-made tanks come with a 10-year warranty and 20+ year lifespan.
Features:
Impervious polyethylene silo bin.
UV stabilised.
Food grade.
No rust.
Fully weather sealed.
Galvanised steel frame.
Suitable for a range of products: molasses, oil, water clarification.
High-flow 45-degree cone.
Product code: PSL-35.
-
Overall Height – 6500mm
Diameter – 3400mm
Outlet Height – 650mm
-
Vented hinged lid.
Level indicator tube.
Loose flange or BSP fitting outlet options.
Bottom fill or BSP inlet options.
Air input point in stub outlet for aeration.
-
Enmach tanks are delivered to most areas of Queensland, access permitting.
The delivery driver will need a clear, flat area to unload your tanks.
-
1,800G / 7,000L
Liquid Storage Silo / Cone Bottom Tank
Request a quote
-
Enmach poly storage tanks are a high-quality, durable feeding solution suitable for our harsh Australian environment. These Australian-made tanks come with a 10-year warranty and 20+ year lifespan.
Features:
Impervious polyethylene silo bin.
UV stabilised.
Food grade.
No rust.
Fully weather sealed.
Galvanised steel frame.
Suitable for a range of products: molasses, oil, water clarification.
High-flow 45-degree cone.
Product code: PSL-7.
-
Overall Height – 3200mm
Diameter – 2700mm
Outlet Height – 500mm
-
Vented hinged lid.
Level indicator tube.
Loose flange or BSP fitting outlet options.
Bottom fill or BSP inlet options.
Air input point in stub outlet for aeration.
-
Enmach tanks are delivered to most areas of Queensland, access permitting.
The delivery driver will need a clear, flat area to unload your tanks.
-
1,000G / 4,000L
Liquid Storage Silo / Cone Bottom Tank
Request a quote
-
Enmach poly storage tanks are a high-quality, durable feeding solution suitable for our harsh Australian environment. These Australian-made tanks come with a 10-year warranty and 20+ year lifespan.
Features:
Impervious polyethylene silo bin.
UV stabilised.
Food grade.
No rust.
Fully weather sealed.
Galvanised steel frame.
Suitable for a range of products: molasses, oil, water clarification.
High-flow 45-degree cone.
Product code: PSL-4
-
Overall Height – 2800mm
Diameter – 1800mm
Outlet Height – 500mm
-
Vented hinged lid.
Level indicator tube.
Loose flange or BSP fitting outlet options.
Bottom fill or BSP inlet options.
Air input point in stub outlet for aeration.
-
Enmach tanks are delivered to most areas of Queensland, access permitting.
The delivery driver will need a clear, flat area to unload your tanks.
-
Grain Silos / Dry Goods Silos in sizes from 4.2m³ to 60m³
Request a quote
-
Enmach poly grain silos feature:
Impervious polyethylene silo bin.
UV stabilised.
Food grade.
No rust.
Cooler storage temperatures, sweating minimised.
Fully weather sealed.
Galvanised steel frame.
Suitable for a range of products — fertiliser, grain, feed, seed.
Specially designed for a range of industries such as poultry, dairy, piggeries, water settlement plants and feedlot industries
-
Dimensions vary according to size. Contact us for specifics.
-
Inclusions vary per product.
Polycarbonate sight glasses.
Stainless steel knife gate outlet with wind handle opening.
Heavy duty option available to suit heavy S.G products.
Blow tube delivery option.
10-year warranty and 20+ year life span.
Hi-flow 45 degree cone.
Expandable system.
Remote opening lid.
Manhole in base cone.
-
Enmach tanks are delivered to most areas of Queensland, access permitting.
The delivery driver will need a clear, flat area to unload your tanks.
-
View Product Sheet for Enmach Poly Grain Silos.
Contact us for a Product Sheet on a particular product.
Poly Stakka Silo / Hopper Bin
Request a quote
-
Enmach’s Poly Stakka Silo Bins are ‘smarter than your average bin’, offering a versatile storage option in a small silo size. They hold 1.3 tonnes of wheat.
The Enmach Poly Stakka Bin is fully customisable due to full in-house control over production. Heavy-duty version is an available option if you’re looking to hold heavy materials such as heavy blended fertilisers or sands. Can be customised to store liquid products with any side poly stubbed outlet welded into the silo to suit the customer.
The bins are built and rotomolded in-house at Enmach’s family-owned manufacturing plant at Bundaberg, Queensland.
Features:
Stackable.
Weatherproof.
Extendable legs.
Integrated ladder.
Full galvanised steel frame.
Liquid storage option.
Translucent bin pictured – other colours available.
Smooth internal surfaces.
Polycarbonate sight glass standard with coloured bins.
Ideal for feeding out grain and pellets, bagging feed, storing the last of your seed and fertiliser.
10-year warranty and 20+ year life span.
Built smart – will handle any situation.
Product code: PSSTAKKA
-
Nominal Tonnage (Wheat 820KG/M3) — 1.3 tonne
Dimensions — 1250mm x 1190mm
Overall Height — 2250mm
Outlet Height — 150mm/560mm
Cubic Capacity — 1.75m3
-
40 degree + discharge angles.
Fully enclosed forklift pockets – double option available.
UV stabilised polyethylene bin.
Stainless “no buckle” outlet.
Two lid options – full open top or 400mm dia lid.
Accessories available separately: auger attachment, bag splitter, chute kit.
-
Enmach delivers to most areas of Queensland, access permitting.
The delivery driver will need a clear, flat area to unload your items.
-
Auger Attachment for Stakka Bin
Request a quote
-
Enmach Auger Attachment for Poly Stakka Bins is a 3m x 5” 12v break away auger, used for easily transferring product from the Stakka Bin.
The auger is fitted with an Anderson plug so it can be run from most machinery or farm utes and trucks.
Product code: PSFEILD
-
-
-
Enmach delivers to most areas of Queensland, access permitting.
The delivery driver will need a clear, flat area to unload your items.
-
Coming soon.
Bulka Bag Splitter for Stakka Bin
Request a quote
-
Enmach Bulka Bag Splitter for Poly Stakka Bins is an optional accessory available for dispensing non-returnable bulk bags in a safe and simple way.
Product code: PBS
-
-
-
Enmach delivers to most areas of Queensland, access permitting.
The delivery driver will need a clear, flat area to unload your items.
-
Coming soon.
Poly Stakka Chute Kit for Stakka Bin
Request a quote
-
Enmach Stakka Chute Kit for Poly Stakka Bins is an optional accessory.
Product code: PSCK
-
-
-
Enmach delivers to most areas of Queensland, access permitting.
The delivery driver will need a clear, flat area to unload your items.
-
Coming soon.
And there’s more.
Ballard Industrial is your local supplier of a full range of quality Nu-Tank and Enmach poly products, manufactured in-house at family-owned businesses in Rockhampton (Nu-Tank) and Bundaberg (Enmach).
We pride ourselves on getting these top-quality, tried and tested products to our customers at ultra competitive prices and with no fuss (we take care of the paperwork for you!).
View by clicking on the catalogues, then contact us to place your order.
